SWITCH POWER SUPPLY SINGLE TYPE S SERIES S-120W

S-120-24 Switching Power Supply 24v 5a 120w, 24v ac/dc power converter

 

 

Features 

 

1. Low  price and high reliable.

2. 105 `C output capacitor

3. AC input power suitable for the world

4. High efficiency and how  operation temperature.

5. Soft-start current can reduce  the AC input impact effecticly.

6. With short-circuit and overload protection.

7. Compact size, light weight.

8. 100% full-load buming test.

9. installed with EMI filter, minmum wave.

10. S-120 SMPS with CE Certificate12V 10A Switching Power Supply 

 

 

Specification

 

Model                   Specification	S-120-24V
DC Output Voltage	24V
Iutput Voltage Error	± 1%
Rated Output Current	5A
Output Current Range	0-5A
Tripple and Noise	150mVp-p
Iniet Stability	± 0.5%
Tolerance Voltage	± 0.5%
DC Output Power	120W
Efficiency	83%
Adjustable Range for DC Voltage	± 10%
AC Input Voltage Range	88~132VAC/170~264VAC selected by switch 47~63Hz; 240~370VDC
Input Current	2.6A/115V    1.3A/230V
AC Inrush Current	Cold-Start Current: 30A/115V, 60A/230V
Leakage Current	<1mA/240VAC
Overload Protection	105%~150%   Type: Cut Output, Reset: Auto Recovery
Over Voltage Protection	…………
High Temperature Protection	…………
Temperature Coefficient	± 0.03% /°C (0~50°C)
Start, Rise, Hold time	200ms, 100ms, 20ms
Vibration	10~500Hz, 2G 10min,/1cycle, a total of 60 minutes, Each axes
Withstand Voltage	Between Input and Output: 1.5KVAC, Input and Shell: 1.5KVAC, Output and Shell: 0.5KVAC
Isolation Resistance	Input and Output Intermal: Input and Enclosute, Output and Enclosure: 500VDC/100M Ohms
Working Temperature and Humidity	`-10°C~+60°C (Refer to Output Derating Cutve), 20%~90%RH
Storage Temperature and Humidity	`20°C~+85°C, 10%~95%RH
Overall Dimension	199*98*38mm
Weight	0.66kgs
Safety Standards	Meet UL 1012 requirement (Not apply for the mark)
EMC Standards	Meet FCC Part 15J Conduction class B

 

 

 

Please Note:

 

1. The testing condition for the parameter above is: 230VAC input, rated load, 25°C 70%Rh, Humidity.

2. Error, include the setting error, line stability and load stability.

3. Wave test: adopting "A12" double wire for 20MHZ, and 0.1uF&uF capacitor short-circuit for interrupting.

4. Inlet Voltage Stability test: when is over load, the lowest voltage of inler is representative to the highest voltage.

5. Load stability test: the load is from 0% to 100%, others 60%.

6. C3,4,32 must be knocked down.